Manufacturer of Ultrasonic Cleaners


SAWA CORPORATION Manufacturer of Ultrasonic Cleaners

Contact +81-72-859-7286

Gravure Cylinder Cleaner SC-G100E

Home > Product > Gravure Cylinder Cleaner SC-G100E

Perfect cleaning cell and flange of the cylinder.

  • One-component ink can be cleaned within 2 minutes !!
  • Lift up device for cylinder is available.



  • One-component ink can be cleaned within 2 minutes. Two-component ink can be cleaned with 6 minutes if the leaving time is within 1 hour.
  • Cleaning flange face at the same time.
  • 700 to 1350mm cylinder can be cleaned by this machine!
  • Enable to skip manual work in a printing machine.
  • Energy-saving type! Power consumption is only 850VA.Solvent usage is only 18-30 liters.
  • It is possible to clean anilox roll.。

Cleaning Ability

Cleaning effect

Two-component solvent ink can be cleaned by diluent.


Product No. SC-G100E
Outside dimention W 2,769 D970 H 1,375㎜ (including projecting parts)
Weight 450kg(Dry weight)
Power AC100V 50/60Hz
Power consumption 850VA
Ultrasonic 40kHz 600W
Air 0.5MPa 770NL/min(Peak)
Exhaust duct 5m/sec
Applicable cylinder size Total length: 700~1,350㎜
Circumference: 345~942㎜
*Do not use the damaged cylinder on the surface because there is possibility to scratch to cleaning head.
Drive system Air pump and air motor
Solvent tank capaciry 18 to 30 liters